Vectra Phillips CCR600 code req

Mark Dootson

Usenet Archive
Joined
Apr 9, 2005
Messages
12
Reaction score
0
Does anyone know the default or factory code for the CCR600, It's showing "SAFE" after my battery was disconnected.

Thanks
Mark
 
should be on your documentation somewhere, sometimes a cerdit card or scibbled in the user manual, unless it is a retro fit, then no hope i bet. check all the paperwork, everything you got with the car, look for a 4 figure code. if not it's a trip to a car audio shop or your nice vauxhall dealer, where you might get it for free. else about £10-15 . AFAIK there is no factory default code or WHY?

mike
 
mikeFNB said:
should be on your documentation somewhere, sometimes a cerdit card or scibbled in the user manual, unless it is a retro fit, then no hope i bet. check all the paperwork, everything you got with the car, look for a 4 figure code. if not it's a trip to a car audio shop or your nice vauxhall dealer, where you might get it for free. else about £10-15 . AFAIK there is no factory default code or WHY?

mike

I bought the Car on Wednesday but forgot to pick up the documentation, the previous owner is in the process of posting it to me. I've got a 300 mile trip to look forward to today without a radio.
 
Why not give him a call? He could call the supplying dealer if he has already posted it.

As a matter of interest, why is it in safe mode anyway? Does that mean you have not tested it?

Alan
 
As a matter of interest, why is it in safe mode anyway? Does that mean
you have not tested it?

I tested everything except the CD Changer (I didn't have any CD's with me), when I got home I put a CD in and it played but with a loud beep every 3 seconds, a work colluegue told me that the default code was 1111, and while buggering about with it and trying to put it in I have locked it (9 attempts left). I think I will just wait until the handbook arrives, a lesson learned.

Mark
 

Latest threads

Back
Top