vectra imobiliser

Discussion in 'Vectra' started by scanman, Jan 6, 2004.

  1. scanman

    scanman Guest

    Hi All,
    Can anyone help.

    I have recently bought p reg 2L gls vectra with factory fitted alarm.

    Everything seems to work ok exect acording to the handbook the
    indicators should flash when i operate the keyfob on the central
    locking.

    Any one have any ideas, is it some kind of relay or would i have to
    renew something else..please help...scanman
     
    scanman, Jan 6, 2004
    #1
  2. scanman

    Anthony Britt Guest

    The alarm operates the normal indicator relays (the Vectra has one relay for
    left and one for right). If they are not flashing when the alarm is
    armed/disarmed or triggered, then it is likely that the control unit is not
    set-up correctly. A Vauxhall dealer can reset the country configuration
    with their TECH2 computer - if it is set to UK, then the indicators will
    flash. If it is set to Germany, then the indicators do not flash. A quick
    check with TECH2 will ascertain the country code and reset it if necessary,
    and also actuate the relays manually to test the circuit. This shouldn't
    cost more than £25 at a Vx dealer.

    HTH

    Anthony
    Remove eight from email to reply.
     
    Anthony Britt, Jan 6, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Elektronic schematics for a vauxhall(opel) vectra di 2.0.

  2. Vectra - user comments, please?

  3. Help - Vectra 1.8 DOHC timing???

  4. Vectra Stutter

  5. Vectra water pump

  6. Vectra colour monitor - external video input?

  7. Vectra petrol Tank

Loading...