L
lesley rae
i have a r reg vectra but the lock does not work from the keyfob does anyone
know how to fix it
know how to fix it
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
M
mikeFNB
firstly change the fob battery if you havent yet.
it is quite common for the fob button to get pushed too hard and break the
solder joints on the board inside.
take it to someone that can use an iron & a bit of solder and redo the legs
joints where they go thru the board.
a good method to test if the fob is working is to run it from a bench type
electronic power supply set to 3volts and make sure it draws curent on it's
mA meter. it wwill take about 10-15mA.
mike
it is quite common for the fob button to get pushed too hard and break the
solder joints on the board inside.
take it to someone that can use an iron & a bit of solder and redo the legs
joints where they go thru the board.
a good method to test if the fob is working is to run it from a bench type
electronic power supply set to 3volts and make sure it draws curent on it's
mA meter. it wwill take about 10-15mA.
mike
R
r3duf
JDlesley rae said:i have a r reg vectra but the lock does not work from the keyfob does
anyone know how to fix it
Once you have changed the battery it will need reprogramming (See Manual)