Near side rear door B pillar loom has broken wires (Rear door stopped working initially) but both front and rear door are now not opening so can’t access the wiring. (In fact all 4 doors did stop working but the drivers door worked after I used the key to manually open the lock) I have managed to remove the top of the door card and can see the cover for the locking mechanism but would prefer not to smash open the two layer plastic cover to be able to stick a screwdriver in and try to manually push open the lock. (I know the issue is the loom) Is there a way to manually open the door without breaking the lock? I read somewhere you can put 12v directly through two pins on the lock (bypass the wiring issue) to get the door open but can’t find any videos/tutorials to say exactly how that would be done. Attached is what I can see inside the door.