Radio In Safe Mode...Advice needed please!!

  • Thread starter Thread starter someone famous
  • Start date Start date
S

someone famous

I bought a Vectra today that had been standing for six months.
The battery was completely flat but a quick jump start and it fired up.
The only thing was that the radio was in safe mode.

I was given the radio code by the previous owner but after one hour of
driving the radio never left safe mode.
I have the same problem with my wife's recently bought Vectra.
The previous owner removed the aftermarket Cd player and gave us the
original Vauxhall radio along with code.
I put the radio in and the radio was in safe mode.

I checked the handbook and it says there is a time delay everytime the wrong
code is entered.
Yet I have been unable to enter any code in either radio as they continue to
stay in safe mode.

Thanks in advance for any help or advice given.
 
I bought a Vectra today that had been standing for six months.
The battery was completely flat but a quick jump start and it fired up.
The only thing was that the radio was in safe mode.

I was given the radio code by the previous owner but after one hour of
driving the radio never left safe mode.
I have the same problem with my wife's recently bought Vectra.
The previous owner removed the aftermarket Cd player and gave us the
original Vauxhall radio along with code.
I put the radio in and the radio was in safe mode.

I checked the handbook and it says there is a time delay everytime the
wrong code is entered.
Yet I have been unable to enter any code in either radio as they
continue to stay in safe mode.

Thanks in advance for any help or advice given.
Click to expand...

read the handbook again.
the bit about pressing a button whilst you switch it on ?

dB
 
dogsBollix said:
read the handbook again.
the bit about pressing a button whilst you switch it on ?

dB
Click to expand...

Thanks for the help db problem has now been solved.
 
Yet I have been unable to enter any code in either radio as they
read the handbook again.
the bit about pressing a button whilst you switch it on ?

dB
Click to expand...

Yes you are right DB, often you have to press the 'UM' button while
switching on then press preset 1 to step the 1st digit of the radio code
then repeat on the 2nd 3rd and 4th preset buttons in turn. Once the code is
accepted the radio should be back to normal except for the odd setting such
as the delay before switching off etc.

Gio
 
Correct in pronciple but isn't it the AS button? You also have to
remember to have the ignition on.

Alan
 
Alan said:
Correct in pronciple but isn't it the AS button? You also have to
remember to have the ignition on.

Alan
Click to expand...
Yes Alan you are absolutely right. You have to have the ignition on, press
the AS control button, switch on the radio and keep the AS pressed until the
radio beeps and CODE appears in the display followed by 10 and spaces for
the 4 digit code.
At the time I posted to the group the car was not to hand and I should have
said that I was referring to memory. I had recently had to get our radio
out of Safe Mode after removing the battery from the car but obviously got
some things wrong when I recalled the incident. Getting old is my excuse I
am afraid :-(

Gio
 
You must log in or register to reply here.

Latest threads

Back
Top