M
Mark
Fed up with replacing the Thermostatic Switches in the bottom of my
(Isuzu 1.5TD GLS) Corsa's radiator, so I designed a Microprocessor
controlled box which switches the fan electronically (in 8 different
speed stages), uses the sensor feeding the Temperature gauge, so needs
just 3 wires to connect. 1. the the high speed fan connection of the
Thermostatic switch connector, 2. for the Ground connection and 3. for
a permanent +12V supply. Kicks in at 1/5th speed at 91o and full speed
at 96o. After spending so many hours designing it, and getting the
firmware right, thought it might be a reasonable idea to offer this as
a commercial product (should sell for about £25), is there any
interest? please let me know.
Mark in Spain
[email protected] (remove the X to reply)
Phone/Fax 0034 964 328 153
(Isuzu 1.5TD GLS) Corsa's radiator, so I designed a Microprocessor
controlled box which switches the fan electronically (in 8 different
speed stages), uses the sensor feeding the Temperature gauge, so needs
just 3 wires to connect. 1. the the high speed fan connection of the
Thermostatic switch connector, 2. for the Ground connection and 3. for
a permanent +12V supply. Kicks in at 1/5th speed at 91o and full speed
at 96o. After spending so many hours designing it, and getting the
firmware right, thought it might be a reasonable idea to offer this as
a commercial product (should sell for about £25), is there any
interest? please let me know.
Mark in Spain
[email protected] (remove the X to reply)
Phone/Fax 0034 964 328 153