Heater fan control

Discussion in 'Corsa' started by Crainneag, Nov 26, 2022.

  1. Crainneag

    Crainneag

    Joined:
    Nov 26, 2022
    Messages:
    3
    Likes Received:
    0
    Hi, I have a 1.2 petrol, non a/c Corsa and the heater fan control only works on setting 4. I have fitted a new resistor unit and it restored full function for about 10 seconds before the original fault re-occured. Can anyone give me the meter reading I should expect on the input plug contacts so I can check if the new resistor is duff or there is a power input fault?

    Thanks
     
    Crainneag, Nov 26, 2022
    #1
  2. Crainneag

    Crainneag

    Joined:
    Nov 26, 2022
    Messages:
    3
    Likes Received:
    0
    Me again, how wise os it to bypass the fuse fitted to the resistor and just reply on the main fise in the fuse for circuit protection?
     
    Crainneag, Nov 28, 2022
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.