heated seat failure on omega elite 2000 model

Discussion in 'Omega' started by stuart, Mar 1, 2004.

  1. stuart

    stuart Guest

    hi hope someone can help me here , ive only had the car a week and
    the drivers heated seat has failed, all othere are fine , cant be the
    fuse as all else it covers works. not sure ir sensor prob and if its
    an easy and inexpesive do it yourself kind of fix

    stuart, Mar 1, 2004
  2. stuart

    mike Guest

    first i'd be inclined to check the connector under the seat.
    they can often get 'kicked' & not be mated properly.
    snap open completely then reconnect it.

    2nd, will involve a multimeter.
    break the connector.
    look for 12VDC across two of the pins FROM the car end (feed to seat)
    then use OHMS meter with ignition OFF, for low OHMS <100 across two pins of
    the seat end.

    not sure on the ACTUAL wiring , look in haynes or WHY.

    mike, Mar 1, 2004
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.