Handbrake light not showing when handbrake applied

Discussion in 'Antara' started by RevDave73, Oct 27, 2019.

  1. RevDave73

    RevDave73

    Joined:
    Oct 27, 2019
    Messages:
    1
    Likes Received:
    0
    I have a 2009 Antara auto and when I switch the car on, all the dash lights show including the handbrake light. Once the vehicle starts they all go out including the handbrake light even though the handbrake is still applied. I have adjusted the cable as it was slack, but the light still doesn't come on even though it is applied and the car won't budge.
     
    RevDave73, Oct 27, 2019
    #1
  2. RevDave73

    Rightboy91

    Joined:
    Dec 1, 2019
    Messages:
    7
    Likes Received:
    1
    I would have thought sensor but not sure why car won't move ?

    edit: do you know if on a vectra c 1.9 if the handbrake can be adjusted ? it is part of the caliper .

    thanks
     
    Rightboy91, Dec 2, 2019
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Vectra- strange handbrake behaviour

  2. Cavalier diesel starts fine when cold but then dies when revved

  3. Omega Handbrake

  4. window wipers not returning when turned off

  5. Corsa Handbrake Cable

  6. Wipers not parking when switched off

  7. Either speaker not working or the balance is not right

  8. Agila - driver's side door lock not working (manual lock, not central locking).

Loading...