Frontera Driving Lights

Discussion in 'General Motoring' started by Flingel Bunt, Sep 29, 2003.

  1. Flingel Bunt

    Flingel Bunt Guest

    Just upgraded the front spots (long range driving whatever...) to 100 watt
    bulbs.
    Promptly blew the R/H Headlamp fuse!! (15amp)
    Being a total thicko, should I be upgrading the fuse/relay or something?
    Could it be something touching something it shouldn't?
    Should they be able to take 100 watt without any mods?
    If any mods anyone got any part numbers?

    Cheers,
    Tel.
     
    Flingel Bunt, Sep 29, 2003
    #1
  2. Flingel Bunt

    Tony Morland Guest

    i would make sure they are wired through a relay first , and better still ,
    a separate relay to the headlights, but activated by that one. You dont say
    whether you intend to use these as an addition to full beam or dip , but if
    full beam, they should be de-activated by your dip switch via a relay
     
    Tony Morland, Sep 29, 2003
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Frontera 2.3 Diesel - Engine / Turbo Problem?

  2. Frontera wierd noise.

  3. FRONTERA

  4. 96 Frontera Diagnostic connector

  5. Frontera Towbar Wiring Cable

  6. Frontera Info, Please

  7. frontera ?

  8. Knocking noise in Astra while driving

Loading...