Drive shaft

Discussion in 'General Motoring' started by Hog883, Sep 18, 2020.

  1. Hog883

    Hog883

    Joined:
    Sep 18, 2020
    Messages:
    2
    Likes Received:
    0
    Hi i am quite good at mechanics & have to replace the inner driveshaft boot on my 08 Combo Van, is there anything i need to know before i start the job. Does the joint come off for instance or do I have to remove the outer & fit from that end. Any advice would be really appreciated. Thanks :)
     
    Hog883, Sep 18, 2020
    #1
  2. Hog883

    Leon

    Joined:
    Sep 21, 2020
    Messages:
    6
    Likes Received:
    0
     
    Leon, Oct 10, 2020
    #2
  3. Hog883

    Leon

    Joined:
    Sep 21, 2020
    Messages:
    6
    Likes Received:
    0
    Hi guys was just wondering if someone on here can help me, I have a coolant leak under my car and it’s the pipe that comes from the engine to thermostat housing I think.. 1 bolt on it to engine it’s big plastic and connects to rubber housing and cannot get the name of the pipe or part number, Vauxhall’s seems to have discontinued it.. help..
     
    Leon, Oct 10, 2020
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. simple question astra drive belt replacement

  2. Replacing diff-drive shaft oil seal '95 Astra

  3. Corsa drive belt with air con

  4. Wanted Left Hand Drive

  5. Vectra drive problem in low gears

  6. Cavalier CLutch..how far to pull the shaft?

  7. Corsa B drive shafts

  8. Remove o/s half shaft

Loading...