display problems

Discussion in 'General Motoring' started by dude1224, Jul 9, 2006.

  1. dude1224

    dude1224 Guest

    just changed ,the cam shaft sensor and the crank shaft sensor. all the
    lights come on the dashboard .when i accelarate the abs ,seat belt. ems
    lights come on.the rev counter the heating,fuel level all go mad.any
    clue and how much.thank u
     
    dude1224, Jul 9, 2006
    #1
  2. dude1224

    ib Guest

    I had a similar problem, it turned out to be a faulty regulator in the
    alternator, so the voltage went too high as the revs went up. Check your
    battery voltage , certainly shouldn't go above 15V as you rev the engine
     
    ib, Jul 9, 2006
    #2
  3. dude1224

    Dogger Guest

    Typical kerbside monkey mechanic they don't have the brains to peel a
    banana.
     
    Dogger, Jul 9, 2006
    #3
  4. dude1224

    Vic Boon Guest

    OK If you're that bright, which end to you peel?

     
    Vic Boon, Jul 9, 2006
    #4
  5. dude1224

    Dogger Guest

    I talk to the organ grinder not his monkey so do one you plank.
     
    Dogger, Jul 11, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.