Corsa drive belt with air con

Discussion in 'Corsa' started by Ken Booth, May 8, 2005.

  1. Ken Booth

    Ken Booth Guest

    Has anyone changed the main drive belt on a T reg Corsa 1.4 16v with Air
    Con. I fitted the cam belt easy but had to give up on the drive belt. How
    the hell do you remove the engine mount it goes through

    Regards Ken
    Ken Booth, May 8, 2005
    1. Advertisements

  2. Ken Booth

    me140 Guest

    You need to support the engine and then unbolt the engine mount from the car
    body. Lower the engine about 5mm and slide belt over the mount.
    me140, May 8, 2005
    1. Advertisements

  3. Ken Booth

    Ken Booth Guest

    Thanks for that.
    I had it lowered and loose but it seemed so hard I thought I must have done
    something wrong.
    Regards Ken
    Ken Booth, May 9, 2005
  4. Ken Booth

    me140 Guest

    Sometimes if you unbolt the three bolts for the suspension steady bar on the
    front cross member you get a bit more movement but brute force usually works
    for me.
    me140, May 9, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.