checking fault codes

Discussion in 'General Motoring' started by Rob, Oct 10, 2005.

  1. Rob

    Rob Guest

    anyway of checking fault codes on a 95 cavvy ecotec(X20XEV without the use
    of the in dash light(as i dont have one due to digi dash)

    now got a wee problem where the car wont start and i dont know where to
    begin(poss cranksensor failure)


    anyway of pulling codes without it ?
     
    Rob, Oct 10, 2005
    #1
  2. Rob

    Born To Be Mild Guest

    Born To Be Mild, Oct 10, 2005
    #2
  3. Rob

    airsmoothed Guest

    airsmoothed, Oct 10, 2005
    #3
  4. Rob

    Rob Guest

    Rob, Oct 10, 2005
    #4
  5. Rob

    Mike Dodd Guest

    I'd caution you on this - I bought a similar unit from halfrauds - a
    Gunsen, I think, which showed a LED on the front packaging. Once I'd got
    it home and opened it up, the box had no LED, and there was a clause in
    the instructions that went along the lines of "In the case of <the
    Cavalier I had at the time> there is no LED on the unit, use the Engine
    Fault Light in the cabin instead"

    I needed one because I suspected a failed engine fault light; turned out
    the scrote who'd owned the car before had removed the light before
    trading the car in.
     
    Mike Dodd, Oct 11, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. mk3 astra ecu fault codes

  2. mk3 astra ecu fault codes

  3. Fault Codes

  4. 1999 astra 1.7 td fault codes

  5. Zafira fault codes

  6. Fault Codes

  7. vectra fault codes

  8. Zafira fault codes and OBD2

Loading...