Central locking on 99 Vectra

Discussion in 'Vectra' started by JackP, Oct 15, 2006.

  1. JackP

    JackP Guest

    The other day I noticed the rear nearside door lock wasn't working, the
    button stayed up and the door remained unlocked, I managed to get it to
    lock eventually by pressing the button down manually, although the
    first few attempts still left the door unlocked even though the button
    was down. The next day it seened to have rectified itself and
    everything worked as normal....until the afternoon, then, and ever
    since the button has remained in the up position although the door is
    locked and con not be opened from inside out out. The button will not
    press down manually anymore either. Before I start taking the door to
    pieces, has anyone any ideas on what the like fault is?


    JackP, Oct 15, 2006
  2. JackP

    JackP Guest

    Sorry, should have read "and can not be opened from inside or outside"
    JackP, Oct 15, 2006
  3. JackP

    mikeFNB Guest

    probably just wants a service with wd40 etc.
    if the central locking is working on the door [clunk etc] then it might have
    popped off the end of the arm [bolt] inside
    you might have to remove the panel etc and relocate it.

    i'd be inclined to give all the locks a good squirt now one has gone.

    mikeFNB, Oct 15, 2006
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.