Carlton A/C Clutch

Discussion in 'General Motoring' started by David, Aug 5, 2003.

  1. David

    David Guest

    How do I test the clutch on my A/C compressor. It does not click and
    engage. I put a probe on the wiring and it did kick in and work for a
    while then when I switched off did not re-engage.I did not add power
    or earth just measured that a connection and power was there. There is
    power to the clutch and both side indicate power flowing through. Is
    there a relay which could be the problem?

    Thanks,
    David
     
    David, Aug 5, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.