Blaupunkt CAR 300 - Cant get rid of SAFE message

[blabla]

I purchased used Panasonic CQ-C1110AN from eBay, which was replacement
for my old Blaupunkt CAR 300 (Astra). The Panasonic unit was
functioning great while outside of car's panel. However, once I
installed it, it just stopped working. Even thought wires were
insulated and not touching I concluded that I must have done something
wrong to burn the unit.

Hence, in despair I installed back my Blaupunkt CAR 300. However, the
unit is continuously displaying that it is in SAFE mode. Even though I
follow procedure with the AS button, only thing I get is a single beep
sound and still same message on the display - SAFE.

Plz Help?

 

[Chris]

Hi,

By pressing AS you mean the procedure to enter the security code? You have
to press the AS button in whilst turning on the radio.

The word SAFE should have a number displayed with it. This number tells you
how many attempts you have left to enter the correct code. You get ten
chances - if the code is not entered correctly then the radio will lock up
and has to be taken to a shop for unlocking. Its a bit confusing because to
enter say 6 for the first digit you press 1, six times - this is not made
clear in the audio manual.

It could be that you have incorrectly entered 10 codes - whilst trying to
figure out how the codes work.....easy to do.

Chris

 

[Kendzo]

Yes, I mean by pressing AS to start the procedure of entering the
security code.

Well, Radio was working fine till i removed it. It stayed for about 3
weeks being disconected from the power supply. I don't know if that
plays any role.

However, what i find strange is that there is no number displayed with
message SAFE. Plus, I did not have opportunity to enter incorrectly
codes 10 times, as radio keeps displaying SAFE message even after the
procedure to enter the security code. I read somewhere on groups that
there is some issue with ignition which might cause issue like mine.
Has anybody faced that ignition problem?