Aftermarket Radio Display

Discussion in 'General Motoring' started by Peter, Jun 8, 2004.

  1. Peter

    Peter Guest

    Hi,

    I have a 1994 Corsa GLS which has the seperate display on the top of the
    center console. When I bought the car, the date part of the display goes
    blank when the radio is turned on. The radio has its own display.

    Is there any way of just keeping the date on the display?

    also...

    Is there any way of wiring up the radio to come on with aux? I need full
    ignition for it to come on and listening to the radio when waiting for
    someone would be nice!

    Thanks
     
    Peter, Jun 8, 2004
    #1
  2. Peter

    Alan Guest

    It sounds like you have a non-genuine stereo fitted. The only way you can
    get the display cheaply is to fit a Vauxhall CAR200, 300, 400 etc. They are
    cheap on ebay.

    Wiring the stereo for aux should be easy as it would have been like that
    initially. I recommend pulling the stereo out and trial and error on the
    wires with a circuit tester.

    --

    Alan


    New & used Vauxhall cars & vans, servicing, repairs & parts
    www.steeles.co.uk
     
    Alan, Jun 8, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Omega Display Fault

  2. Repair Vectra CAR400 Radio and Display Screen in London

  3. vectra multi function display

  4. Corsa "C" display bulbs

  5. Multifunction display on Vectra

  6. Aftermarket Tow Bar on Signum

  7. Vectra 2.2 SXi 2003- time / radio display backlight bulbs?

  8. Install aftermarket stereo and remove cd30

Loading...