1996 Vectra Locks then Unlocks problem

Discussion in 'Vectra' started by noodles, Jul 24, 2005.

  1. noodles

    noodles Guest

    Hi

    Apologies is this has been covered before, a quick google search yielded no
    results.

    I have a 96 Vectra with the two button keyfob remotes. When I attempt to
    lock the car with the remote, it locks, then unlocks.

    However if I press the lock button then quickly move out of range (or shield
    the remote) the second unlock doesn't happen.

    This happens on both keyfobs, tried changing the batteries & reprogramming
    them, to no avail. Anyone got any ideas?

    Many Thanks
     
    noodles, Jul 24, 2005
    #1
  2. noodles

    me140 Guest

    I would try unplugging each door wiring loom in turn - easy to do without
    taking any panels off.
    If that doesn't show up the guilty motor try unplugging the ecu for a few
    minutes.
     
    me140, Jul 24, 2005
    #2
  3. noodles

    noodles Guest

    Cheers, ill give that a try
     
    noodles, Jul 24, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Omega 2.0i 1995 - tickover problem revs high then stalls

  2. Calibra door locks

  3. Astra fuel pump runs for 10 seconds, or so, then stops?

  4. Cavalier diesel starts fine when cold but then dies when revved

  5. Engine Management Light Flashing - 1996 Vectra

  6. Corsa unlocks itself!

  7. ABS Fault Vectra 1.8 1996

  8. Engine control indicator lit then out. Astra M reg.

Loading...